4-in-1 Benefits and Specifications

How does BREWHA's 4-in-1 provide the easiest, and most sanitary brewing experience possible?BREWHA 4-in-1
  1. Built of heavy construction to withstand up to 14.9psi of pressure in the vessel and 7psi in the jacket
  2. Highest quality construction will hold its value and provide years of brewing enjoyment
  3. This patent pending conical fermenter is the only fermenter that has a built in port for heating and a jacket for chilling
  4. Boiling in the fermenter provides perfect, easy-to-achieve, chemical-free sanitation every time 
  5. The risk of oxidation and microbial contamination is almost completely eliminated by having capacity for heating, chillling and fermenting built right into the vessel
  6. Performing multiple functions in one vessel saves time and money
  7. The conical bottom allows for easy removal of trub (protein, yeast and other solids) from your fermenter either prior to fermentation, during, or after fermentation is complete
  8. A 1.5" TC ferrule in the cone allows for insertion of temperature sensor 
  9. Large diameter tri-clamp port(s) in the cone allows for easy insertion of a 100% stainless steel electric heating element 
  10. A second port in the lid allows for pressurizing your conical when racking to a keg to overcome any height differences and ensure your beer is not exposed to oxygen
  11. The large diameter lid provides full and easy access to your vessel for thorough cleaning after fermentation
  12. Heavy duty stainless steel construction will give you a lifetime of brewing pleasure (and hold its resale value)
  13. Heavy duty wheel castors make moving the vessel easy even when full
  14. Sanitary fittings are easiest to disassemble and reassemble for thorough cleaning
  15. There are no threaded or weld-free or bulkhead fittings that can leak or harbor microorganisms and are difficult to disassemble and clean
  16. No lips or crevices ensures best sanitation possible
  17. By just adding a Condensing Assembly one can even distill spirits

 

Seven sizes are available: Small 30L/8gal (10L/3gal to 20L/5gal of beer); Medium 60L/16gal (20L/5gal to 40L/10gal if beer); Large 90L/24gal (20L/5gal to 57L/15gal of beer); 1.5BBL 240L/63gal (57L/15gal to 170L/45gal of beer), 3BBL 420L/111gal (170L/45gal to 356L/94gal of beer), 5BBL 720L/190gal (356L/94gal to 585L/155gal of beer) and 7BBL 1060/280gal (585L/155gal to 820L/216gal of beer). 

Dimensions (approx)

4-in-1 (without lid, add minimum 20cm/8" for lid, plus blow off hose height; diameter does not include ferrule or handles): 
Small: 96cm/38" height (34cm/14" OD)
Medium: 110cm/43" height (45cm/18" OD)
Large: 120cm/47" height (50cm/20" OD)
1.5BBL: 155cm/61" height (72cm/28" OD)
3BBL: 178cm/70" height (86cm/34" OD)
5BBL: 195cm/77" height (106cm/42" OD)
7BBL: 203cm/80" height (126cm/50" OD

Please note: Water Heating Element, 240V Power Controller, Electronic Temperature Controller, Hop Basket and Temperature Controlling Valve and other accessories are sold separately from the 4-in-1. They are not included with the 4-in-1.

The BREWHA 4-in-1 includes

A. ten 1.5" sanitary wing-nut tri-clamps (twelve on 1.5BBL and larger)
B. ten 1.5" sanitary gaskets (twelve on 1.5BBL and larger)
C. seven 1.5" sanitary tri-clamp ferrules (eight on 1.5BBL and larger)
D. two hose barbs attached to 1.5" sanitary tri-clamp caps 
E. three 1.5" sanitary valves (four on 1.5BBL and larger))
F. heavy duty rubber-wheeled locking castors
G. one 1.5" ferrule for insertion of temperature sensor
H. handles on fermenter
I. raised lid handle
J. 2" sanitary wing-nut tri-clamps for heating elements (and bottom dump port on 1.5BBL and larger)
K. 2" sanitary gaskets 
L. 2" sanitary tri-clamp ferrule for inserting a heating element (one each on less than 1.5BBL, two on 1.5BBL, four on 3BBL, six on 5BBL, five 3" on 7BBL)
M. 1.5-2mm 304 stainless steel cooling jacket 
N. 60° conical bottom (57° for 7BBL)
O. graduated water level ruler
P. withholds up to 14.9psi pressure in the body (when racking beer into kegs) and 7psi in the jacket
Q. 2-4mm 304 stainless steel vessel and lid 
R. seven ferrule welds and finishing (12 on 1.5BBL, 14 on 3BBL, 16 on 5BBL, 15 on 7BBL)
S. 14.9psi pressure/vacuum relief valve 
T. racking arm 
U. sanitary sampling valve (for 1.5BBL and larger)
V. wooden crate for shipping to ensure safe delivery and storage
W. high quality construction to last a lifetime
X. ship weight approx 40kg (Small), 60kg (Medium), 80kg (Large), 180kg (1.5BBL), 250kg (3BBL), 350kg (5BBL), 450kg (7BBL)

Click here to return to Microbrewery Fermenter product page
 Click here to go to the BREWHA Microbrewery specification page