Stainless Jacketed Electric Brew Kettle
Stainless Jacketed Electric Brew Kettle
Couldn't load pickup availability
The only brew kettle system with a built-in chilling jacket for easy, effective sanitary cooling in your brewery. Comes with ports for adding electric water heaters for electric brewing and a flat bottom for a gas-fired brewery.
Built into the walls of this brew kettle equipment, the stainless steel jacket provides super easy and super sanitary chilling of wort once the brew boil is complete. Water line hose accessories kits connect to the jacket with two easy tri-clamp fittings completely removing the need for immersion or counter-flow chiller equipment or transporting your kettles to the sink (see note below about pressure control in the jacket). And since the jacket is in the wall of the brew kettle, it is completely sanitized by the boil—wort contamination from your chilling method never needs to cause worry about beer contamination again.
The BREWHA brew kettle system has a flat bottom so can be heated with gas burners (a racking arm that remove wort from the bottom of the kettles is included). However, with a ferrule for inserting a temperature sensor and two 2" sanitary tri-clamp ferrules for addition of electric heating elements making your beer brewing equipment electric is easy. Add two 1440W elements if you only have access to 120V power (two 1440W elements on 120V power brings 60L or 0.5 BBL from mash out to boil in about 30 minutes). Add 5500W elements (one element on 240V brings 60L or 0.5 BBL from mash out to boil in about 15 minutes). Easily and safely access 240V power in your brewery and control your system boil rate (especially important during hot break) with our 240V Tabletop Power Control Box, the 15 gallon 0.5 BBL and 31 gallon 1 BBL systems can accomodate up to two heaters so could use up to two Tabletop controllers, the 2 BBL 63 gallon / 240L electric brewing kit has three heater slots so could use up to three Tabletop controllers, or purchase a programmable touchscreen power controller system with either 55A 2 heater output, or a 95A 4 heater output.
Sizes:
- 60L / 15 gallon / 0.5 BBL kettles
- 120L / 31 gallon / 1 BBL kettles
- 240L / 63 / 2 BBL gallon kettles
Note: brew kettle brewing systems includes valves, clamps, gaskets and fittings accessories; power controller kits, sensors/thermometer kits and premium immersion water heating elements accessories are not included with the brewing kettle systems. For a complete beer brewery system, refer to the links below to add stainless steel hot liquor kettles, mash tun and stainless steel conical fermenters. If you would like us to compile a complete brewing kit for you with a complete brewing system and all beer making accessories, please reach out to us using the form on the contact page.
Note: always use a water pressure regulator on the water jacket and never restrict the jacket exit in any way or pressure might build up and damage the vessel
Product benefits and specifications
Mash Tun
Hot Liquor Tank
Conical Fermenter
Share


