Cold Liquor Water Tank

USD 7,784.00

Sale Sold out

Shipping calculated at checkout.

Size Cold Liquor (Water) Tank 585L/5 BBL Cold Liquor (Water) Tank 1170L/10 BBL Cold Liquor (Water) Tank 2808L/24 BBL

Quantity

Cold liquor (water) tank

These insulated and jacketed Cold Liquor (Water) Tanks CLTs for 3 BBL, 5 BBL, 7 BBL, 10 BBL, and 15 BBL brewing systems are the world's most versatile cold liquor/water storage tanks.

Including two separate water jackets (for cooling media to pass through to chill the water inside), these tanks can be used for chilling cold water to help complete post-boil knock down or other applications where a large reservoir of pre-chilled water is needed. These tanks have two 3" ferrules for heaters (optional heating), as well as two independent, vertical jacket zones to which up to two of our brewery chillers can be connected for chilling overnight.

Note: The 600L/5 BBL CLT HLT tank comes with casters, the 1200L/ 10 BBL and 2800/ 24 BBL CLT HLT tanks come with adjustable foot pads.

Cold liquor tank specifications

Solid 304SS construction
a sensor port (ETC, sensors and chillers to cool water are not included but can be purchased separately)
Water gauge sight glass in L and USG
Dimple jacketing for highest heat-transfer efficiency
Analogue temperature gauge
Dual zone water jacket (can accommodate two of our water or glycol chillers for combined 14000BTU rapid cooling between batches)
two 1.5" lid ports for filling the tank (a float switch is not included but can be connected to an RO or other filter for automatic filling of the tank)
one large 12" access port
butterfly valves; clamps and fittings
four casters and a push bar on 600L/130 gallon; larger tanks have adjustable footpads for levelling before using anchor bolts to fix to the floor
1.5-2" chloride-free polyurethane insulation

Optional accessories (consider adding to purchase; contact us for details):

ETC tank temperature sensor and controller to monitor tank temperature to drive cooling pumps or close heater contacts or heating solenoids (if using tank for just cooling one or two are recommended to drive one or two water chillers)
Stainless electric brewery water heaters for heating water; this tank comes with two 3" element ports and two 3x2" cap reducers to accommodate up to two 5.5kW or 9.5kW (3 phase) heaters
Brewery electric touchscreen power controller (3 phase) can be used instead of an ETC and tabletop controller for more precise and powerful programmable control for heating
Water Chillers to crash the water temperature near freezing.