Water Flow Meter (Single Jet)

This accurate and reliable Single Jet Water Flow Meter is useful for metering the amount of water going into your brewery brew system. It is recommended to install it in a horizontal orientation and flow rate should exceed 1L/minute for accurate reading. Connects to either a 1/2" NPT coupling, or 1.5" tri-clamp compatible ferrules. The meter has been tested and certified by WRAS for sanitary water supply and have a dial measuring precision of 0.1L and are >98.5% accurate. The meter is recommended for use with water <80°C/176°F. 

The digital resettable counter option displays water volume in 1 unit increments (ie. 1USG or 10L) and has a 120cm/4' cord length and is removable (from the meter) when not in use.

Note: some assembly may be required

Note: the NPT and TC Flow Meter (L) have 10L pulse output (the 0.1 dial reads for 1L)

Tip: Brewer Randy Calley of James Calley Brewing Co in Sapulpa, OK had an great suggestion for customers wanting to eliminate the display cord; using some high quality silicone, he attached the display directly to the base of the flow meter.

Water flow Meter manual