This tank can be used for cooling and storing cold water to help complete post-boil knock down, where tap water is not cold enough to do the job. It has two independent, vertical jacket zones to which two of our Water Chillers can be connected for chilling overnight. A removable temperature stratification screen beneath the water return port at the top minimizes movement and mixing of water inside the tank so that you get the most chilling power out of the cold liquor.
- Solid 304SS construction
- a sealable lid (to minimize spillage when moving)
- a removable temperature stratification screen
- two sensor ports (two ETCs can be used to control to separate Water Chillers for quickest chilling), two lid ports, one for filling the tank and the second for a 3psi PRV valve (if the lid is on, a pressure relief and vacuum breaker valve must be installed -- changing liquid levels cause pressure changes inside a closed tank which can cause damage)
- one 3psi PRV
- four casters and bolts
- one push bar
- two 1.5" 90 degree elbows (one for water return inside the tank -- direct this one up to minimize water currents inside the tank—and a second for the exit port at the bottom
- one 12" 1.5" tube to bring the exit port valve over to the side for easy connection
- four 1.5" butterfly valves
- one 1.5" cap
- twelve 1.5" clamps
- twelve 1.5" silicone gaskets
- ID 965mm/38"
- OD 1100mm/43"
- Height including casters 1780mm/70"