This video describes the BREWHA wall-mount brewery power controller's features and goes into detail on how to use the programmable touchscreen. The controller is contained in a splash-proof enclosure and comes with a powerful touch screen controller that can regulate all aspects of the brew as well as store brewing programs.
After four weeks of eager anticipation, there are few things more devastating to a brewer than discovering an unwanted microbial infection or tasting burnt/smokey notes in your latest brew. The BIAC takes you a long way towards preventing the unwanted infection, since by boiling in the fermenter it is heat sanitized. However, one needs to be careful...
There has been some discussion online about the benefit of circulating wort inside the BIAC fermenter during chilling to reduce the chill time so we put it to the test in our largest system, the 5BBL BIAC. We tested on the 5BBL, since being the largest system we currently offer, it has the lowest chilling surface area to wort ratio and therefore (all other factors being equal) the longest chill time of the BIAC systems.
The Digital Power Box is a reliable, precise, safe, portable and flexible means of controlling 230V electrical power in your home or commercial beer brewing system.
This video describes its structure and function and provides some useful tips for the safe brewing of beer.
Regulating the output of a heating element is important during mashing (preventing scorching), boiling (stopping hot break), distilling (preventing 'burping'), and even fermenting (some brewers are experimenting with using the element on very low wattage to keep fermenter warm). Reducing the power output of 5500W/240V elements is easy with the Power Control Box and now it is easy with 1500W/120V elements as well. This video shows how.
The new Water Heating Element from BREWHA comes with the following features:
(Click to read more)
- pre-installed and ready to use; no wiring, heat-shrinking, sealing threads or drilling required
The 240V Brewing Power Controller (BPC) is designed to give safe and easy access to 240V/30amp power in the home. Without it, one would either have to use 120V power or plug a heating element directly into a 240V socket. Using 120V power (like is found in standard wall sockets) only delivers about 1500W power, and would take a very long time to heat water. On the other hand...
This is the first video in a three part series about how to setup BREWHA equipment (Mash Tun, Hot Liquor Kettle and 3-in-1) and ready the water for brewing beer. It includes setup instructions as well as general information on brewing.
Learn how to boil, chill and ferment wort all in same vessel. This is the third video in a three part mini-series on learning how to brew beer using the BREWHA 3-in-1. The 3-in-1 is a combined boil kettle and stainless conical fermenter that makes great sanitation easy, yielding the best beer you'll ever ferment.
In this video you'll learn how to produce sparge water for rinsing grain to improve mash efficiency. You'll also learn how to precisely and safely control your mash temperature with just one heating element through use of the HERMS system in the BREWHA Hot Liquor Tank.
Hot liquor tank extraordinaire.
A high quality stainless steel heat exchange coil inside the hot liquor tank turns your sparge water reservoir into a safe and efficient heat exchange recirculating mash system (HERMS).
The world's first boil kettle with a built-in chilling jacket.
Built into the walls of this 16 gallon / 62L brew kettle, the stainless steel jacket provides super easy and super sanitary chilling of wort once the boil is complete.